Composite Fabrics Q&A

Slub yarn The yarn is sometimes thin and sometimes thick, and one section is called a slub yarn. Slubs were originally a common defect in textile production. Due to some problems such as drafting and uneven thi…

Textile materials include textile raw materials and textile semi-finished products processed into textiles, such as Various fibers, slivers, yarns, fabrics, etc. The hygroscopicity of textile materials is an im…

The pre-treatment of pure cotton or polyester/cotton fabrics is mainly to remove impurities on cotton fibers so that the fabrics have good printing and dyeing processing properties. Conventional desizing, scour…

Calculation method of fabric cost Fabric cost = raw material cost + weaving cost + dyeing, printing and finishing processing fee + Inspection, rolling and packaging fees + tax + losses in each link 01 Raw mater…

Shrinkage is the change in length or width of textiles after washing, dehydration, drying and other processes in a certain state. a phenomenon. The degree of shrinkage involves different types of fibers, the st…

Foreword: The spindle is one of the main components of twisting and winding on the spinning machine. It is an assembly with a slender rotary shaft supported at two points as the main body. There are spindles on…

Insufficient fabric weight is not a big problem and has little impact in regular trade, but when it comes to export orders or specific trades, weight is often a key issue. Ring, often because a company finally …

The official weight is the weight converted from the official moisture regain of cotton. The calculation method is: the gross weight is subtracted from the weight of the packaging (tare weight) to obtain the ne…

Yarn requirements for bleached blanks, printed blanks, and dyed blanks 　 (1) Bleached gray fabric: After the gray fabric is bleached, the surface of the fabric will be clear and white, so the defects remaining …